25 x VHC Vitamin D tests (£19.50 per test strip)
30 x UniSampler
1 x Sample buffer
1 x RFID Card (programmed specifically to batch)
1 x Manual
Step 1. Take a finger prick sample and fill the capillary tube to the top with the blood from the finger pad. Add 5 drops of buffer solution to the UniSampler (a special sample collection and mixing device, with an integrated high precision capillary for accurate sampling)
Step 2. Replace the capillary into the UniSampler mixer. To empty the blood sample into the buffer solution mix it well using energetic semicircle movements until the mixture in the capillary is distinctly lighter in colour than the bottom of the sample mixer
Step 3. Add 3 drops of the sample mix to the inlet of the VHC Vitamin-D test cassette, place the adapter over the test cassette and the VHC reader onto the adapter and turn on
Step 4. Place the RFID card onto the meter to complete data transfer. Once the test is set the integrated timer ensures that the results for an individual test are read automatically after 15 minutes. Your client's Vitamin D results are displayed as ng/ml and nmol/l
Step 1. Take a finger prick sample and fill the capillary tube to the top with the blood from the finger pad. Add 5 drops of buffer solution to the UniSampler (a special sample collection and mixing device, with an integrated high precision capillary for accurate sampling)
Step 2. Replace the capillary into the UniSampler mixer. To empty the blood sample into the buffer solution mix it well using energetic semicircle movements until the mixture in the capillary is distinctly lighter in colour than the bottom of the sample mixer
Step 3. Add 3 drops of the sample mix to the inlet of the VHC Vitamin-D test cassette, place the adapter over the test cassette and the VHC reader onto the adapter and turn on
Step 4. Place the RFID card onto the meter to complete data transfer. Once the test is set the integrated timer ensures that the results for an individual test are read automatically after 15 minutes. Your client's Vitamin D results are displayed as ng/ml and nmol/l
Areas of Use | Learn how to run a 15 minute Vitamin D test: VHC Reader and Vitamin D test strips Training Video |
---|---|
Directions for use | How to run a Vitamin D test in 5 easy steps:Step 1. Take a finger prick sample and mix with five drops of sample buffer in our UniSampler (a special sample collection and mixing device)Step 2. Place three full drops of the sample on to the Vitamin D test stripStep 3. Set a timer for 15 minutes using either the VHC reader or your own timerStep 4. Place the VHC Reader over the test strip, press test and tap the RFID CardStep 5. The reader will then show you the clients results in ng/ml and nmol/lPlease note the VHC Reader which presents the Vitamin D results is sold seperately.Learn how to use: VHC Reader and Vitamin D test strips Training Video |
Conditions | Vitamin D Testing |